WIFI DEAD ZONES PERTH · PERTH METRO
WiFi dead zone in your home? Better Call Sia.
300–500m²
Typical Perth home floor area a single router has to cover
50%
Signal loss through one double-brick wall
15–20
Connected devices in the average Perth household
Same-day
Fix available most days
The problem
Why Perth homes get
WiFi dead zones
Here’s why WiFi dead zones Perth homeowners deal with are so common — and so fixable.
It’s not your imagination, and it’s not a faulty router. Perth homes are genuinely a difficult environment for WiFi, for a few specific reasons.
01
Double brick construction
02
Big floor plans
03
Alfresco and outdoor living
04
Two-storey layouts
05
Too many devices, one router
06
One fix, done properly
Quick fixes
Why the “quick fixes”
don’t work
Before calling us, most people try one of two things — and both tend to make the problem worse, not better.
Quick fix #1
A more expensive router
Quick fix #2
A cheap WiFi extender
What we actually do
What we
actually do
The actual fix is coverage design, not more power in one spot — which is exactly what a properly installed mesh WiFi system does. Read our full eero mesh comparison →
Every job starts with a proper diagnosis, not a guess.
01
Site assessment
02
The right hardware for your home
03
Placement that’s actually tested
04
Wired backhaul where possible
05
Full device migration
06
Free phone assessment
Service areas
Our Perth
service areas
FAQ
WiFi dead zones Perth:
your questions answered
How do I know if it’s a dead zone problem or an NBN/internet plan problem?
If speed tests are fine near the router but drop off or disappear in other rooms, it’s a coverage problem, not a plan problem. If speeds are slow everywhere, including right next to the router, that’s more likely your NBN connection or plan — we’ll tell you honestly which one it is on the phone assessment, before recommending anything.
Will a better router fix it?
Usually not on its own — a stronger router still broadcasts from one point in the house. If the issue is a dead zone in another room, coverage design (multiple access points working together) fixes it; router speed doesn’t.
Do I need a full mesh system, or just one extra unit?
Depends on the home. Some dead zones need one additional node; larger or multi-storey homes usually need a proper mesh setup. We’ll tell you honestly what’s needed on the assessment call — not oversell a bigger system than your home requires.
How fast can you fix it?
Most dead zone jobs are same-day, including assessment, hardware if needed, and installation, depending on your suburb and the day you call.
Do you cover outdoor areas like the alfresco or pool?
Yes — outdoor coverage is one of the most common reasons Perth homeowners call us, and it’s a standard part of what we assess and fix.
What causes WiFi dead zones Perth homes experience?
The two biggest causes in Perth are double-brick construction and large floor plans. Double brick absorbs and reflects WiFi signal far more than the timber-frame homes common in other states, and Perth’s big blocks mean rooms sit further from the router than a standard single router was ever designed to cover.
Get started
Ready to fix WiFi dead zones
Perth-wide?
Or fill in the contact form below and we’ll get back to you within the hour.
